10 Technical data
AL HPM
Hybrid Powder Mixer HPM-M15 - technical data
HPM-M15
ROW version
US version
CANADA version
Motor
Type:
(Incl. SS motor shroud): Standard
foot-flanged motor with a fixed ball
bearing on drive side, according
to IEC metric standard, 2 poles
= 3000/3600 RPM at 50/60 Hz,
enclosure IP55 (with drain hole with
labyrinth plug), insulation class F.
Standard-C Face/Foot mounted
NEMA motor with a fixed ball bear-
ing on drive side, according to
NEMA standard, 2 poles = 3600
RPM at 60 Hz, enclosure TEFC
Wash Down.
Standard-C Face/Foot mounted
NEMA motor with a fixed ball bear-
ing on drive side, according to
NEMA standard, 2 poles = 3600
RPM at 60 Hz, enclosure TEFC
Wash Down
Mains option:
Local mains disconnect
Insulation class:
IP66/NEMA 4X
Display
Graphical local control panel
Power
Installed power
18.5 kW / 25 hp
Frequency drive
Type:
Danfoss VLT® AutomationDrive FC 300 series
Power rating:
18.5 kW / 25 hp (Normal overload 110 %/60 s)
Input voltage
380-480 VAC
380-480 VAC
. 525-600 VAC
RFI filter:
Class A1/B
Class A1/B
No filter
Materials
Product wetted steel parts:
W. 1.4404 (316L) and Duplex steel
Other steel parts:
W. 1.4301 (304)
Product wetted seals:
EPDM, PTFE
Other O-rings:
EPDM
Finish
Semi-Bright
Internal surface roughness:
Pipework acc. to DIN11850 Ra<0.8 µm (Impellers: Blasted/machined)
Shaft seal:
Single mechanical SiC/SiC, flushed version
Flush tank
Approx. 1 ltr. incl. sight glass. Note: Flush through possible via easy connection
Connections
Liquid inlet connection:
DIN 11851 DN 50 male union
TriClamp 2"
TriClamp 2"
Liquid outlet connection:
DIN 11851 DN 40 male union
TriClamp 1½"
TriClamp 1½"
Control of powder addition
Manually actuated special C-Ball valve for dry ingredient adding
Other:
Blind cover at powder inlet for use during CIP
24
www.sks-online.com
www.sks-webshop.com