5 Functioning
AL HPM
Rotor/stator, stage 1
The rotor/stator system is located on the drive shaft, upline of the pump impeller and downline of the injector. The main job
of the rotor/stator is to disperse the powder in the fluid.
A
B
C
D
E
F
G
H
4302-0014
A: Circulation
B: Stator
C: Flow
D: Rotor
E: Stage 1
F: Stage 2
G: Outlet
H: Impeller
Pump impeller, stage 2
The impeller is located on the drive shaft downline of the rotor/stator. The main job of the impeller is to deliver the powder/fluid
mixture back to the tank at high pressure and deliver a sub-flow back to the injector via the circulation pipe (see Figure 6).
Sight glass (Only HPM-M15)
The sight glass is located in the HMP supply and is used to observe the fluid flow visually.
Funnel and cover plate (Cover plate only HPM-M15)
The funnel consists of two parts: the funnel itself, into which the powder is delivered, and the funnel cover plate, which is mainly
used as a support surface for the product. After cleaning, the cover plate is placed on the funnel and therefore protects it
from pollution in the funnel room outside operating hours.
Frame (Only HPM-M15)
The modular frame is made from easy to clean tubing and allows safe and easy handling of the HPM.
The frame stands on rollers, the complete system is mobile.
16
www.sks-online.com
www.sks-webshop.com
