4 Installation
4.3
Mounting bracket kit on the actuator - step 1
Step 1
Mount the coupler (A) in the slot on the bottom side of the actuator.
A
Step 2
Be aware that the actuator position marking on the bottom of the
actuator is aligned as shown on drawing (B).
In cases where the actuator position marking is not aligned,
please refer to the troubleshooting section for an instruction on
how to re-align it.
2109-0015
B
B
2109-0016
B
Step 3
Mount the bracket using the 3 enclosed screws (D).
The tightening torque is 10 Nm.
NOTE!
The enclosed screws are applied with a thread-locking adhesive.
In the case of dismantling and later reassembly, the screws must
be secured with a thread-locking adhesive.
2109-0017
D
D
D
10
Summary of Contents for ESE02126-EN
Page 2: ......
Page 23: ...7 Parts list 7 1 Parts list 2109 0007 C 12 1 D D B A 13 2 11 23 ...
Page 25: ...25 ...
