manualshive.com logo in svg

Alfa Laval ALP 100, Operating Instructions Manual

Share
Download
Alfa Laval ALP 100 Operating Instructions Manual Download Page 34

8.3 Installing the pump

Screw pumps can be operated in any installation position. However, we
recommend that the pump should not be mounted above the motor since
pumped liquid could enter the motor should a leak occur.

Figure 6: Model ALP vertical mounting

Figure 7: Model ALP Horizontal mounting

Prerequisite:

• The pump connections are to be protected against soiling, for example by

using the protective covers mounted in the factory.

 

CAUTION

Leaking pumped liquid can damage the motor.

• Do not mount the pump above the motor.

 

CAUTION

Damage to the pump and piping through insufficient fastening

.

• Only fasten the pump on a stable load bearing surface.

• Ensure that the fastening elements are tightened sufficiently.

1.

Bring the pump into position. Ensure that the flow direction that is marked
by arrows on the flanges is correct.

2.

Fasten the pump with fastening elements securely to the mounting surface.

200007725-1-EN-GB

34

8 Installation, removal and connection

EN

Summary of Contents for ALP 100














































































Reviews:

No comments

Brands by name

Popular brands

Load more brands