Alfa IN PEGAS 250 MIG SYN, Instruction Manual, Page: 6 / 23

6/23
ALFA IN a.s. © www.alfain.eu
Caution
We warn users, that they are responsible for possible interference from
welding.
4. TECHNICAL DATA
Technical data
PEGAS 250 PEGAS 320
Method MIG/MAG MMA MIG/MAG MMA
Mains voltage V/Hz 3 x 400/50-60 3 x 400/50-60
Fuse A 16 @ 16 @
Max. effective current I
1eff
A 12,9 13,1 12,9 12,8
The range of welding. current A 20-250 30-250 20-315 30-300
Open circuit voltage U
20
V 54,4 63,1
Welding current (DZ=100%) I
2
A 210 190 210 190
Welding current (DZ=60%) I
2
A 250 230 250 230
Welding current (DZ=x%) I
2
A 60%=250 50%=250 25%=315 20%=300
Protection IP 23S
Standards EN 60974-1; EN 60974-10 cl. A
Dimensions (w x d x h) mm 240 x 640 x 438
Weight kg 26,6
Wire feed speed m/min 1,0 - 15 1,0 - 15
Spool diameter mm 300 300
Spool Weight kg 15 15
Warming tests were made at ambient temperature 20÷25°C. The load factor for
ambient temperature of 40 ° C were determined by simulation.
S
The machine marked with this symbol can be used for welding in areas with
an increased risk of electric shock. The machine structure is designed so that,
in any case, even if the failure rectifier does not exceed the permitted peak value
of the open circuit voltage
according to EN 60974-1, i.e., 113 V direct current or
68 V alternating.