16/23
ALFA IN a.s. ©
www.alfain.eu
REMOTE CONTROL
Picture
8
–
Remote control from the torch
Designation Description
H1
Display of remote control
H2
Display
H3
Torch button M for choosing the function
MAN: Wire speed, Voltage/Choke, JOB (See How to
switch on the remote control of JOBs on below)
SYN: Power, Correction/Choke, JOB
H4
Torch button LOCK lock/unlock the buttons UP/DOWN
and M
The UP/DOWN and M buttons get automatically locked
when the torch trigger is pressed.
H5
When the LED is on it indicates UP/DOWN and M button
are functioning.
H6
Torch button UP
H7
Torch button DOWN
HOW TO SWITCH ON THE REMOTE CONTROL OF JOBS
1. Press buttons
V13
and
V19
at the same time for more than 3 s. The
displays
V10
and
V11
will show JOB ON. (To switch off this function, press
shortly V13
and
V19
at the same time.
2. By means of the button
H3
set the function JOB change.
3. By means of buttons
H6
(UP) and
H7
(DOWN) switch among the saved
JOBs.
Symbols on the torch display
H1
Symbol
Description
A synergic program is running on the welding machine