Alfa IN AXE 250 IN MIG MAN, Instruction Manual, Page: 17 / 24

17/24
ALFA IN a.s. © www.alfain.eu
Symbols on the torch display H1
Symbol Description
A synergic program is running on the welding machine
Amperage setting (SYN)
Wire speed setting
No symbol
Material thickness setting (SYN)
Voltage setting (MAN)
Correction (SYN)
Symbols on the torch display H2
J.xx
JOBs (xx – JOB No)
I.xx
Choke level (SYN/MAN).
(Only with firmware 2015 and newer)
ELE
Machine is in MMA (Electrode) mode
RESET
1. Pressing V8 + V19 at the same time more than 3 s makes RESET – default
parameters will be restored.
2. It will delete saved JOBs!
MIG/MAG WELDING SYNERGY
1. Choose SYN method (see SETTING THE METHOD OF WELDING)
2. Left display V10 shows SYN, right display V11 shows the number of
synergistic curve.
3. Selects synergic curve (program number) using encoder V16 according to
the table, which is located inside. To confirm the program number press the
encoder
V5 .
Picture 10 – Table
of synergic curves