- 3 -
ALFA IN a.s. ©
www.alfain.eu
1.
INTRODUCTION
Congratulations on your new ALFA IN product. We are proud to have you as
our customer and will strive to provide you with the best service and reliability
in the industry.
This Operating Manual has been designed to instruct you on the correct use
and operation of your ALFA IN product. Your satisfaction with this product
and its safe operation is our ultimate concern. Therefore please take the time
to read the entire manual, especially the Safety Precautions. They will help
you to avoid potential hazards that may exist when working with this product.
Read and understand this entire Manual and your employer’s safety
practices before installing, operating, or servicing the equipment. While the
information contained in this Manual represents the Manufacturer's best
judgement, the Manufacturer assumes no liability for its use.
ALF 251/261/280/320/400 aXe are three phase sturdy welding machines for
MIG/MAG welding.
The machines are designed to produce maximum power output combined
with high reliability and efficiency.
The users interface is as simple as possible; however, there are secondary
parameters that can be set from the main front panel if suitable. All of them
are available in compact models, ALF 280, 320 and 400 can be ordered also
as sets consisting of the generator, interconnection cable bundle and
separate wire feeding unit. We will refer to the MINOR2-MAJOR and
SYNERGY controls as DIGITAL.
CONTROL MODEL
BASIC
MINOR2
MAJOR
SYNERGY
A + V meter
optional
NO
YES
YES
Wire initial speed (Soft Start)
NO
NO
YES
YES
Advice of the parameter settings
NO
NO
NO
YES
Electronic feedback of the wire
speed
NO
YES
YES
YES
2 stoke / 4 stroke
YES
YES
YES
YES
Adjustable Post and Pre Gas
time
NO
YES
YES
YES
Spot and Interval welding
YES
YES
YES
YES
Adjustable Burn Back Time
NO
YES
YES
YES
