- 24 -
ALFA IN a.s. ©
www.alfain.eu
If led LED 16
continuously lights the spot mode has been selected. If led
16 flashes the interval mode has been selected.
You can have spot or interval welding both in 2 stroke and in 4 stroke mode
(by means of short pressing the button X 3
- LEDs X4
and X18
indicate the mode. Those modes are available in 2T or 4T mode.
To get out of those modes, keep pressing the button 3 for more than 3 s.
SPOT AND INTERVAL WELDING BASIC
SPOT and INTERWAL welding in BASIC are just in 2T.
SPOT WELDING – The potentiometer V7 must be in 0 position. By means of
potentiometer V6 select the time of a spot.
INTERVAL WELDING - By means of potentiometer V6 select the time of a
spot and by means of potentiometer V7 select the time of an interval (the
period during which the machines do not weld)
The spot welding mode is being used for welding short welds of the same
length. The pressing the torch button activates the time circuit that starts and
end the welding procedure.
