`
23
Indicate
Illustration on the Digital Display When Gate
Opener is Running
E.g.
When the Soft Start Period (STP) is set at 3 sec, and the GRP is 23 sec, how can we get 4 sec of
Soft Stop Period (SPP) to meet the requirement? The answer is clear, i.e. we may set the Fast Running
Period (FRP) at 16 sec (23 – 3 – 4 =16 sec).
12. Return to Factory Set
When the Digital Display indicates “Pd”, press and release the “INC” or “DEC” button. All data will return
to factory set, the Digital Display indicates “dF”.
13.
If all of data is set and no other change needed, press “FUNC” Button. “- -” appears on the Digital
Display, and the opener enters standby mode.
The left image on Digital Display symbolizes motor of gate opener 1 when the gate opener is running.
The right image on Digital Display symbolizes motor of gate opener 2.
When the motor is run to gate -open direction or gate -close direction, the image on Digital Display
indicates “n” or “u” respectively.
When the motor is not running, the Digital Display indicates
“- -”.
When Gate Opener 2 is set as Master gate (i.e. when “10” indicated at P2 set mode in the Control
Board), the Digital Display flashes “-n” before the gate completely opens and closes.
Adjusting the Limit Switch
Step 13
Adjusting the Limit Switch of Actuator 1
The position of Limit Switch A was
fixed in factory, do not adjust it again.
Plug on the power to running gate
opener, use a screwdriver to loose the
screw of Limit Switch B, slide Limit
Switch B to the desired closed position
and fix it.
Limit setting for Gate 1 is finished now.
NOTE:
Always place the magnetic ring between the Limit Switch A and B.
Step 14
Adjusting the Limit Switch of Actuator 2
The position of Limit Switch C was fixed in
factory, do not adjust it again.
Use a screwdriver to loose the screw of
Limit Switch D, slide Limit Switch D to the
desired closed position and fix it.
Limit setting for Gate 2 is finished.
NOTE:
Always place the magnetic ring
between the Limit Switch C and D.
NOTE:
The magnetic ring in the moving rod can be manually placed between both Limit Switches in
each actuator. See Page 24 Emergency Release.
Summary of Contents for AS 1300
