AR2000 SLIDING GATE OPERATOR
3
1.Important safety information
Carefully read and follow all safety precaution and warnings before attempting to install and use
this operator, incorrect installation can lead to severe injury.
z
The gate operator should be installed by a qualified technician; otherwise, serious personal
injury or property damage may occur.
z
The auto-reverse function must be checked during installation to ensure that the gate can
auto-reverse in the event of obstruction.
z
This auto-reverse function should be regularly inspected and adjusted, if necessary.
z
When opening or closing the gate, do not attempt to walk or drive through the gate.
z
Children should not be allowed to play near or operate automatic gates.
z
Install the gate operator on the inside of the property, DO NOT install it on the outside of the
property where the public has access to it.
z
Be careful when in close proximity to moving parts where hands or fingers could be
pinched.
z
Do not allow control devices to be placed so that a person can access them by reaching
through the gate.
z
In the event of power failure, an emergency release key allows you to operate the gate
manually.
z
The operator should be switched off before repairing it or opening its cover.
z
Please erase and reset the code after installing the operator.
2. Main features
z
The device is used to drive the sliding gate.
z
For your safety, the operator will stop and reverse if it was obstructed on closing and stop
when it was obstructed on opening.
z
Supports up to 100 remote controls.
z
Infrared terminal (N.C) is supplied to use.
z
Auto-close feature is available for this operator.
z
Pedestrian
mode.
z
Manual key release design for emergency purposes.
3. Technical parameters
Table 1
Power supply
AC 110V, 60Hz
Motor speed
1540r/min
Gate moving speed
13 m/min
Output torque (It is adjustable by
pressure screw see Fig.2)
14 N
·
m
Limit switch
Magnetic limit switch
Remote control operating range
30m
Frequency
433.92MHz
Remote control mode
Single-button
Auto-close time
0-44 sec.
Working time
90 sec.
Noise
≤
58dB
Environmental temperature
-10
º
C~+55
º
C
