5
The parent unit can be used immediately.
The display shows the charging development of the batteries (depending
on the settings of the baby monitor (the parent unit will be turned either
on or off, how high the volume level is, the baby cries a lot), the batteries
will the fully charged after 12 to 24 hours.
2.2 BABY UNIT:
The baby unit is powered through the sup-
plied power adapter.
Only connect the supplied AC adapter with
the following specifi cations:
Input: 100-240VAC 150mA;
Output: 6VDC 450mA
Connect the power adapter to the 6 VDC
connection located on the parent unit then
put the power adapter into a 230 Volt electri-
cal outlet.
2.3 PLACEMENT TIPS:
•
DO NOT place the baby unit in the bed with the baby, and keep a
minimum distance of 2 meters between the baby and the baby unit
•
MAKE SURE THE BABY CAN NOT TOUCH THE ADAPTER CORD.
•
Do not place the baby unit or the parent unit in direct sunlight or in a
damp place. The baby monitor is not waterproof. Too much moisture
may cause damage to the electronics.
Summary of Contents for DBX-98
Page 1: ...USER MANUAL DBX 98...
