background image

11

4 GENERAL (SAFETY)
 INSTRUCTIONS 

AND 

TIPS 

4.1 GENERAL:

The baby monitor should only be used as an assisting device and not 
as a substitute for an adult or baby-sitter. 

Check the function ability of the baby monitor each time before use. 
In addition to checking the range, and connection control, it is recom-
mended to regularly check the connection during usage. 

The DBX-98 should not be used for anything else than for detecting 
sounds from within your own private premises; anyone else within the 
listening perimeter of the baby monitor should be informed.  

A license is not required in order to use the wireless baby monitor. 
The system can be used as needed within the home. There is no 
guarantee, however, that the signal will always have an interference-
free signal.   

If the baby monitor and parent unit are not being used, it is advisable 
to turn them off using the on/off button. 

4.2 USING MUTIPLE BABY MONITORS:

 

The technology behind the DBX-98 makes it possible for more DBX-
98 baby monitors (baby unit and parent unit) to be used next to each 
other in order to monitor multiple baby rooms simultaneously and still 
have an interference-free signal; each parent unit and baby unit is 
equipped with a unique code. This code prevents the DBX-98 from 
picking up sounds from other baby monitors in the area, or that other 
baby monitors pick up the sounds coming from your baby monitor. 

It is not possible to expand your DBX-98 with additional single baby 
units or single parent units.  

Summary of Contents for DBX-98

















Reviews: