background image

13

4.6 MAINTENANCE:

Clean the baby monitor only with only a damp cloth; Never use che-
mical cleaners. 
Before cleaning any attached power adapters should be disconnec-
ted. 

4.7 EVIRONMENT: 

The packaging of this baby monitor can be recycled as old 
paper. Should this product reach the end of its life cycle, do 
not dispose of it into the normal household waste. Rather take 

it to a collection point for the recycling of electrical and electronic 
equipment. 

Old or damaged batteries should be disposed of in an environmen-
tally friendly manner according to your local regulations. Do no throw 
away used batteries together with your household waste. 

5  DECLARATION OF CONFORMITY

This device complies with the essential requirements and provisions 
as defi ned in the European Directive 1999/5/ EC. The declaration of 
conformity is available on the website at: WWW.ALECTO.INFO 

6 TECHNICAL SPCIFICATIONS

Number of channels:  

120 (selected automatically) 

Frequancy:  

1881.792 - 1897.344 MHz 

Power supply baby unit: 

power adaptor: 6V/450mA/

 (incl)

 

 

(Ten Pao - S004LV0600045)

Power supply parent unit:  power adaptor 6V/450mA/

 (incl)

 

 

Batteries: 2x 1,2V 400hAh NiMH

 

 

rechargeable, size AAA or HR01 (incl)

Transmitting power: 

250mW max.

Advised room temperature: between 10°C and 39°C 
Storing temperature: 

between 0°C and 60°C

Summary of Contents for DBX-98

















Reviews: