ALDI Workzone Titanium+ 52299 User Manual Download

Page: 26 / 38

3500W Digital Inverter with Pure Sine Wave

AFTER SALES SUPPORT

e-mail: [email protected]

1800 909 909

MODEL: №. INF3800A • 03/2016 • 52299

(toll free)

AFTER SALES SUPPORT

(toll free)

3500W Digital Inverter with Pure Sine Wave

e-mail: [email protected]

1800 909 909

MODEL: №.

INF3800A • 03/2016 • 52299

Operation

240V AC Connection

This generator provides a clean digital output suitable for most electrical

appliance/s including televisions, computers, laptops, caravans etc.
It comes fitted with 3 x 240V AC outlets, giving you the ability to run

3 x electrical appliances at the one time, as long as the combination of the

maximum rating of each appliance does not exceed the maximum rated

power of the generator.

Other combinations:

Caravan fridge (200w)

+ toaster (1600w)

+ drill (1100w)

= 2900w

Caravan water heater (1500w) + globe (60w)

+ TV (200w)

= 1760w

Angle grinder (2000w)

+ TV (200w)

+ Caravan Fridge (200w) = 2400w

Hair dryer (1600w)

+ caravan fridge (200w) + laptop (250w)

= 2050w

Connecting apparatus to the Generator

Start the generator and allow the generator to run for a few minutes to warm up.
• check the green leD power supply indicator (9) is glowing green.
• check the total rating of the appliance/s to

be connected and ensure the rating of the

appliance/s does not exceed the rating of the

generator.

• check the appliance/s to be connected are turned

‘OFF’.

• check the master 240Va.c switch (13) is turned

OFF (Fig R).

• maintain normal safety precautions with

appliances and accessories as for use on normal reticulated mains supply.

240Va.c

OUTLET 1

OUTLET 3

OUTLET 2

MAXIMUM COMBINATIONS OF APPLIANCES / DEVICES UP TO 3200W

FRAME

OFF

LAPTOP

250W

200W

POWERSAW

700W

1150W

CARAVAN AC

3000W

LAPTOP

250W

POWERSAW

700W

3950W

Summary of Contents for Workzone Titanium+ 52299







































Search results

Summary of Contents for Workzone Titanium+ 52299

Reviews:

Related manuals for Workzone Titanium+ 52299

Brands by name

Popular brands

ALDI Workzone Titanium+ 52299, User Manual

Search results

Summary of Contents for Workzone Titanium+ 52299

Reviews:

Related manuals for Workzone Titanium+ 52299

Brands by name

Popular brands