background image

QR codes take you where you want to go 

quicky and easily

Whether you require product information, spare parts or accessories, 
details on warranties or aftersales service, or if you want to watch 
a product demonstration video, our QR codes will take you there in 
no time at all.

What is a QR code?

 

A QR-code (QR=Quick Response) is a type of matrix that can be read 
with a smartphone camera and that contains a link to a website or  
contact details, for example. 
Advantage: You are not required to manually enter a website address 
or contact details.

How it works

 

To scan the QR code, all you need is a smartphone with QR codes reader 
software and an Internet connection*. This type of software can be 
downloaded for free from your smartphone’s app store.

Try it out now

 

Just scan the QR code with your smartphone and 
find out more about the Aldi product you have 
purchased*.

* Depending on your tariff you may be charged for the connection.

Product

Info

For Know How Videos, click on the 

“Product Assistance” tab, then the 

“How To Product Videos” link.

Summary of Contents for Workzone Titanium+ 52299







































Reviews: