aldes 11023473, Assembly Instructions Manual

Page: 24 / 100

24
5.3. Scheme
CO
2
Sensor Aldes
Nx/Lx
0-10 V
(volt)
N3/L3
N1/L1
0V
0 Ppm CO
2
200 Ppm CO
2
400 Ppm CO
2
600 Ppm CO
2
800 Ppm CO
2
1000 Ppm CO
2
1200 Ppm CO
2
1400 Ppm CO
2
1600 Ppm CO
2
1800 Ppm CO
2
2000 Ppm CO
2
1V 2V 3V 4V 5V 6V 7V 8V 9V 10V
0-10V Proportional
Flow or Speed
0-10 V
(volt)
N3/L3
1,5 V 9,5 V
N0/L0
0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V
5.4. Updating unit software from USB key
The software can be updated with the following procedure:
1) Stop the product (power it off)
[Open the door for Classic models]
2) Insert the USB key into the USB port
3) Power the product back on
4) Wait for the LED to turn green or about 30 s
5) Remove USB key
The USB key must only contain the update file supplied by Aldes.
6. MAINTENANCE
6.1. Filter replacement
Filters must be changed regularly depending on use conditions and the machine's environment. The installer can configure the filter timer from nine to twelve
months.
1.
Open the filter flap.
2.
Remove the filters and replace them with new ones.
Filter references
Item Description
If configuration A If configuration B
Left Right Left Right
11023490 Dust filter Standard Top 300 Standard Top 300
11023491 Pollen filter Standard Top 450 Standard Top 450
11023492 Particle filter Right only Left only
11023493 Fine particle filter Right only* Left only*
11023494 Bacteria filter Right only* Left only*
11023495 VOC filter Right only* Left only*
* We recommend using a Dust filter 11023490 in addition to these filters to guarantee their lifetime and effectiveness.