aldes 11023473, Assembly Instructions Manual

Page: 19 / 100

19
4.4. Wall fixing
Wall fixing is the recommended mounting method for the unit.
The fastening anchors must be adapted to the support wall and designed to
withstand a load of 120 kg.
Torx 20
x2
4.4.1. Fastening Premium models
- Fix the guide strip to the wall (
1
) (the cardboard packaging includes a template for drilling the wall to the correct dimensions).
- Hang the product on the guide strip (
1
+
2
).
- Check that the product is stable and horizontal.
- Use the fastening stirrup supplied with the product to lock its fastening. Use a fastening anchor (not supplied). (
3
).
1 2
(B)
3
4.4.2. Fastening Classic models
- Drill the lower cradle (BOTTOM) and the top cradle (UP) fastening holes in the wall (see marks on box).
4
- Screw the bottom cradle in as far as it will go (screws not supplied).
- Screw the top cradle leaving it free to slide > screw in the bottom of the J.
5 - Insert the machine into the bottom cradle.
6 - Push it upwards against the wall.
- Slide the top part against the metal plate of the machine.
- Screw into the plate from above.
- Screw the top cradle into the wall as far as it will go.
4 5 6
4.5. Installation on stand (in accessories)
Kit 11023484 sold as an accessory is used to install the unit on the ground.
The unit must be fully accessible for servicing.
- Mount the stand kit according to the instructions supplied.
- Check that the unit is held firmly by the stand.
- Refer to the instructions delivered with the accessory for more detail.
EN
574
570,7
271,2
429
191.5 + 10
242.4 + 10
574
570,7
271,2
429
191.5 + 10
242.4 + 10