aldes 11023473, Assembly Instructions Manual

Page: 22 / 100

22
5.2. Structure of InspirAIR
®
remote control menus
The INFORMATION menu can be accessed without password. It display the unit's key settings without being able to alter them. The installer can thus find out
about the unit's characteristics and operation. The user can use it to communicate elements remotely to the installer if the unit does not seem to be working
properly and for initial remote troubleshooting.
INFORMATION
i
Settings
Display the unit's key settings without being able to alter them:
- control type
- time delay - filter type
- current speed - comfort temperature
Filter alert
Display without being able to alter them:
- filter type
- filter status (timer elapsed or not)
- number of days remaining
Error Display the error code(s) activated by the unit
Product ID
Display without being able to alter them:
- item no. of the unit
- serial no.
- unit and remote control software no.
Connectivity
Display which accessory is connected to the unit and confirm its operating state:
- remote controls
- 0-10 V sensors - heating coils
- Aldes Connect modem - ModBus connectivity
The USER menu is specific for the user and can be accessed without password. Here he can adjust his ventilation every day and launch simple actions.
USER
Languages Choose the use language
Light signal
(Premium unit
only)
Choose the unit's beat on the Premium unit:
- change of colour according to the air quality
- beat in time with the fan speed
- not lit
Filters Choose the period and reset the filter timer to zero
Programming Launch rapid programming of the ventilation in the dwelling
Sensors
Activate or deactivate, temporarily or permanently, taking the indoor air quality into account to run the ventilation automati-
cally
Open fire Activate for two hours positive pressure ventilation operation to encourage a fire to develop in an open fireplace
The INSTALLER menu is specific for a competent installer and can be accessed with the password: 0405. The installer can access all the settings, accessories and
operating and maintenance data for the machine. The installer will be able to configure the product via the InspirAIR
®
remote control (11023480 - InspirAIR
®
CO
2
remote
control or 11023479 - InspirAIR
®
remote control) as well as via the configuration software Aldes Configurator available on the https://services.aldes.com/logiciels site.
Installer
Assistant reboot
Settings
Connectivity
Maintenance
Language
Certifications
Factory reset
Quick fine tune
Dwelling type
Date and hour
Heating coils
Open fireplace
démo signal
Country of inst.
Imbalance
Regulation mode
Fire dampers
Timer filters
Sensors
Radon mode
Actual values
Config. level
Dry cont-config
Units