Rigging manual LR24 Rev. 1.21
13
5. Array configurations ___________________________________________
LR24 transport options
Straight pack/ compression mode:
All LR24 cabinets are connected vertically
in a straight pack. This saves building
space and enables pre-flight angle-setting.
All red pins are placed in the angle arm
hole. Except the angle arm of the top
cabinet. The bottom cabinet is mounted to
the PRRGL24 according to the picture right.
Turn the triangular angle arm of the
PRRGL24 in the short position. Do not use
the locking pin. First, pin the top hole of the
angle arm with the bottom cabinet
connection pin (8). Then mount the front
cabinet couplers (2) to the front holes of
each dual hole bracket.
Mounting of the PRRGL24TOP on a straight pack
Mount the front brackets of the PRRGL24TOP with their front holes to the top
cabinet couplers. Both brackets are on the inside of the cabinet couplers.
Connect the cabinet angle bar (5) according to the picture on the left. It is also
marked at the rear side of the PRRGL24TOP. Pin its locking pin with the angle
arm in the bottom hole of the rear (middle) brackets of the PRRGL24TOP. Pin
the angle pin (4) through the ‘P’ marked hole in the angle frame (7) and align it
with the compression slot of the angle arm.
Summary of Contents for LR24
Page 1: ......
