Rigging manual LR24 Rev. 1.21
12
5. Array configurations ___________________________________________
LR24 transport and array building options
Curved pack/ Fly mode:
All LR24 cabinets are connected vertically
in a curved pack. This saves building space
and enables Pre-flight angle-setting. All red
pins are stowed in their parking holes. The
bottom cabinet is mounted to the PRRGL24
according to the picture on the right. Turn
the triangular angle arm of the PRRGL24 in
the upright position and pin with the locking
pin. First, pin the top hole of the angle arm
with the bottom cabinet connection pin (8).
Then mount the front cabinet couplers (2) to
the rear holes of each dual hole bracket.
Mounting of the PRRGL24TOP on a curved pack
Mount the front brackets of the PRRGL24TOP with their rear holes to the top
cabinet couplers. Both brackets are in between the cabinet couplers Connect the
cabinet angle bar (5) according to the picture on the left. It is also marked on the
rear side of the PRRGL24TOP. Pin its locking pin through the angle arm in the
bottom hole of the middle brackets of the PRRGL24TOP. Pin the angle pin (4)
through the ‘P’ marked hole in the angle frame (7) and align it with the
compression slot of the angle arm.
Summary of Contents for LR24
Page 1: ......
