Rigging manual LR24 Rev. 1.21
10
5. Array configurations ___________________________________________
GRD24B options
The GRD24B has multiple mounting options. The picture on the left shows the different pick-points for flying an array. The A1 & A2 marked points are the default
hoist points.
It is also possible to use one pick point from the A1
linear pattern. Use it only for max. 12x LR24. Use
two hoists at any time. This is safer and easier for
array building
When hanging a 12-24 LR24 array with 2 hoist
points, use the outermost front and rear A1 pick
points.
In case of a permanent installation, combine points
A1 and A2 for a stable 3 or 4-point hang. Use 1,5T
shackles at all times
A3 indicates the mounting position of an angle
inclinometer. It has a 4x ø4mm; 16.5mm x
108.8mm hole pattern for the Teqsas laser/
inclinometer.
A4 is a 20mm/0.8-in hole for a 3,25T shackle used
in compression mode flying, or as a cable sling
attachment.
The 2 holes A5 will hold the connection pin between
the LR24 angle arm and GRD24B
A8 marks the removable angle arms which are
used on the top connection points on the GRD24B
and are pinned by G1. The arms are secured in
their parking space with their locking pins and a
small fastening knob.
Summary of Contents for LR24
Page 1: ......
