Rigging manual LR24 Rev. 1.21
9
4. Rigging components __________________________________________
Cabinet connections LR24
Array assembling can be done in two ways: Fly mode or Compression mode. This
is determined by the available space, time or available parts.
There are 10 user selectable logarithmic angles, which can be determined by the
Alcons Ribbon Calculator™ simulation program. The angles are suitable for both
Fly and Compression mode array flying.
The angle lay-out is pictured below. The “P” indicates the position of the angle pin,
when parking the angle arm.
The picture on the right shows the
angle frame(7), with the angle
arm(5) in its parking position,
locked by the angle pin (4). It has
two slots for both modes.
The arm is fitted with a tab, to hold
the arm when placing it into
position.
The indication on the corner handle
bar indicates the horizontal
dispersion of the LR24 cabinet; 90°
as shown, or 120°
7
5
4
Summary of Contents for LR24
Page 1: ......
