Alcatel SPEED TOUCH 570, Cli Reference Manual

Page: 32 / 268

2 Bridge Commands
32 / 268
3EC 16982 ADAA TCZZA Ed. 01
bridge iflist
Show the current state of all or the selected bridge interfaces.
SYNTAX:
bridge iflist [intf = <ifname>]
[intf] The name of the bridge interface to show the configuration of.
If not specified all bridge interfaces are shown. OPTIONAL
EXAMPLE OUTPUT:
=>bridge iflist
OBC
: Internal
Connection State:
connected Port: OBC PortState: forwarding
RX bytes: 75783 frames: 572
TX bytes: 82768372 frames: 341221 dropframes: 0
eth0 : Internal
Connection State:
connected Port: eth0 PortState: forwarding
RX bytes: 156344216 frames: 5899238
TX bytes: 75689 frames: 425 dropframes: 5558017
NewBridge : dest : Br1
Retry:
15 QoS: default Encaps: vcmux Fcs: off
Connection State: connected Port: wan0 PortState: forwarding
RX bytes: 83 frames: 13
TX bytes: 30740 frames: 102 dropframes: 0
=>
DESCRIPTION:
`RX bytes` indicates the number of Received bytes, `TX bytes` the number of Transmitted bytes.
OBC is short for On Board Controller and indicates the physical bridge port.
RELATED COMMANDS:
bridge ifadd Create a bridge interface.
bridge ifattach Attach a created bridge interface.
bridge ifconfig Configure a bridge interface.
bridge ifdelete Delete a bridge interface.
bridge ifdetach Detach a bridge interface.