Alcatel SPEED TOUCH 570, Cli Reference Manual

Page: 84 / 268

5 DHCP Commands
84 / 268
3EC 16982 ADAA TCZZA Ed. 01
dhcp server spoof
Set DHCP spoofing parameters. Only applicable in case of a PPPtoDHCP Spoofing connection.
(See dhcp server policy command).
SYNTAX:
dhcp server spoof [failtime = <number>]
[errorlt = <number>]
[dodlt = <number>]
[failtime] A number between 0 and 1814400 (seconds).
Represents the time to wait for a PPP link to successfully negotiate an
IP address.
This parameter determines how long the SpeedTouch 570 should
try to set up a PPP connection before returning to normal DHCP
mode, i.e. in case the PPP connection cannot be established within
the time lapse determined by failtime, the SpeedTouch 570 DHCP
server will allocate an local private IP address to the DHCP client.
By default the failtime is 4 seconds.
OPTIONAL
[errorlt] A number between 0 and 1814400 (seconds).
Represents the leasetime of the private address issued when a PPP
link fails.
In case the PPP link fails after failtime has elapsed, this parameter
determines how long the private DHCP lease must be maintained
before retrying to set up the PPP link again.
By default the error lease time is 60 seconds.
OPTIONAL
[dodlt] A number between 0 and 1814400 (seconds).
Represents the leasetime of the temporary private IP address in case
of a dialondemand PPP link.
In case of a dialondemand PPP link, this parameter determines the
interval at which the the temporary DHCP lease must be maintained
before checking whether a public IP address negotiated by a
triggered PPP link is available.
By default the dialondemand lease time is 10 seconds.
OPTIONAL