
36
Files and Directories
March 2005
Boot and Image Files
Although the switch’s flash memory can contain many file
types (e.g., log and snapshot files), there are three specific file
types that provide key switch and network functions. These
files include the
boot.cfg
file, the
boot.params
file, and image
(
.img
) files.
boot.params File
The
boot.params
file provides IP address, gateway, and mask
information for the switch’s Ethernet Management Port
(EMP). This information is required for direct Ethernet
connections to the switch’s primary CMM.
This file also contains default console port parameters (baud
rate, etc.) and can be modified via the
modify boot parame-
ters
CLI command.
In order to be read by the switch, the
boot.params
file must be
placed in the
/flash
directory. If the file is deleted for any
reason, a new
boot.params
file will be automatically gener-
ated on the next system boot. However, all user-configured
information, such as IP address, gateway, and mask informa-
tion, will be lost. Therefore, it is recommended that you keep a
backup copy of this file at all times.
boot.cfg File
The
boot.cfg
file stores your network configuration parame-
ters. When you first boot the switch, no
boot.cfg
file is
present. This file is automatically generated when you first
issue a
write memory
command to save your configuration
changes. The file is then automatically placed in the
/flash/working
directory.
Important.
Your switch must be running from the
/flash/working
directory in order to save changes to the
boot.cfg
file. Refer to
“Working and Certified Directo-
ries” on page 38
for more information.
Once the configuration parameters stored in the
boot.cfg
file
are considered tested and reliable, the file can be copied to the
certified
directory and become part of the “last known good”
software for the switch.
If all copies of this file are deleted and a system boot occurs,
your network configuration will be lost. Therefore, it is recom-
mended that you keep a backup copy of this file at all times.
Files and Directories