27
Installation Guide: 601, 602, and 604 Routers
Operator Interface
Local Management
The OmniAccess 601, OmniAccess 602, and OmniAccess 604 can be locally configured,
operated, and managed using an operator console connected to the Console port. A terminal
(VT-100 or equivalent) or workstation with terminal emulation software can be used for the
operator console. Connect the console to the OmniAccess 601, OmniAccess 602, and
OmniAccess 604 router Console port using an RJ-45 cable with switched ends. If your terminal
equipment requires a special cable, see Table 24 on page 63
for connector pinout information.
To connect the Console cable:
1
Connect the RJ-45 Console cable to the Console port on the router.
2 Connect the other end of the RJ-45 Console cable to the RJ-45 end of the adapter.
3 Connect the DB-9 end on the adapter to the management terminal or workstation.
Figure 21 Connecting the Console Cable (Local Management
)
Remote Management
A modem can be connected to the Console port and used to configure, operate, and manage
the OmniAccess 601, OmniAccess 602, and OmniAccess 604 remotely.
Figure 22 Connecting a Modem for Remote Management
RJ-45 to DB-9 Adapter
Console Port
Console Port
Modem
DB-25 Modem Adapter
