Configuring Network Time Protocol (NTP)
Verifying NTP Configuration
OmniSwitch 6800/6850/9000 Switch Management Guide
December 2007
page 3-13
Verifying NTP Configuration
To display information about the NTP client, use the
show
commands listed in the following table:
For more information about the resulting displays from these commands, see the “NTP Commands” chap-
ter in the
OmniSwitch
CLI Reference Guide
.
Examples of the
show ntp client
,
show ntp server status
, and
show ntp client server-list
command
outputs are given in the section
“NTP Quick Steps” on page 3-3
.
show ntp client
Displays information about the current client NTP configuration.
show ntp server status
Displays the basic server information for a specific NTP server or a list
of NTP servers.
show ntp client server-list
Displays a list of the servers with which the NTP client synchronizes.
show ntp keys
Displays information about all authentication keys.
