WebView CLI Commands
Using WebView
page 9-4
OmniSwitch 6800/6850/9000 Switch Management Guide
December 2007
As an alternative you can use the
https
keyword instead of the
http
keyword to enable Force SSL. For
example:
-> https ssl
When using this format of the command use the
no https server
command to disable Force SSL on the
switch.
Changing the HTTPS Port
The default secure HTTP (HTTPS) port is 443, the well-known port number for SSL. You can change the
port to a number in the range 0 to 65535 using the
https port
command. (Well-known port numbers,
which are in the range 0 to 1023, cannot be configured.)
Note.
All WebView sessions must be terminated before the switch accepts the command.
For example:
-> https port 2500
This command changes the secure HTTP port to 2500.
To restore an HTTPS port to its default value, use the
default
keyword as shown below:
-> https port default
