manualshive.com logo in svg

Alcatel-Lucent 1850 TSS-320, Turn-Up And Commissioning Manual, Page: 132 / 140

Share
Download
Alcatel-Lucent 1850 TSS-320 Turn-Up And Commissioning Manual Download Page 132

............................................................................................................................................................................................................................................................

Accessing and navigating the on-line customer support

(OLCS) web site

Technical Support

A-8

 PN 8DG08136CAAA

Issue 1 March 2008

............................................................................................................................................................................................................................................................

Need Help while registering?

View an OLCS website

After you have logged into the OLCS web site, a personalized view of the Customer 
Support Home page is displayed. This view is based on the user's and company support 
entitlements.

To set Customer Support as the default, if it is the primary destination on the 

www.alcatel-

lucent.com

 website, click “Select default home page” on the left column. The “My 

Products” section provides you with quick navigation to the entitled products and also 
quick access to the CARES tool. While navigating through the various tools, you can 
establish bookmarks to certain tools, documents, or web pages (within OLCS) by clicking 
“Add to Bookmarks.”

The Customer Support home page can be customized by selecting “Customize page 
layout” and adjusting the fields to be displayed (uncheck the boxes to de-select those 
elements). These fields can be adjusted at any time. The changes take effect immediately.

There are two methods to find product information. Click “My Products” to choose a 
product, or click “Documentation” or “Downloads” to display a complete product listing. 
When the full product list is displayed, use the alphabetic listing (default) or the category 
list, whichever you prefer. Once a product is selected, a “Product Summary Page” is 
displayed, which describes all of the tools and features available for this product.

Note:

If content has been posted, but contract entitlements do not allow access, then 

the following padlock icon is displayed:

Ask AL Knowledgebase

The Ask AL web page can be accessed from the left column on the Customer Support 
homepage (unless you changed the view), from the “Technical Support” section in the 
center of the page, or from the “My Bookmarks” section (if it was added there). Once at 

From the U.S.

1 (866) 582 3688, prompt 7

From outside the U.S.

 +1 (630) 218 7688

In Asia/Pacific

Please contact the in-country technical 
support hotline.

Via email

Use the email address: olcshelp@alcatel-
lucent.com or use the site's “Contact Us” 
form

Use the OLCS help desk number for OLCS access problems, registration 
questions, password resets, navigation questions, etc. 

Summary of Contents for 1850 TSS-320













































































































































Reviews:

No comments