Alcatel-Lucent Enterprise OmniSwitch 6865, Hardware User'S Manual

Page: 37 / 63

OmniSwitch 6865 Hardware Users Guide 33
Booting the Switch
The switch does not have a power on/power off switch. To boot a switch, plug a power cord into the
power supply unit and then plug the cord into an easily-accessible, properly grounded power outlet.
(Do not use an extension cord.)
The switch will power on and boot automatically.
Connect any redundant power supply power cords and plug them into a power outlet as well.
System and Port LEDs
During the boot process, component LEDs will flash and change color, indicating different stages of
the boot.
System LEDs
OK • Solid Green: Normal operation
• Solid Amber: Software error detected
• Blinking Green: Diagnostics in progress
VC • Off: The switch is booting
• Solid Green: This unit is Master, normal operation
• Solid Amber: This unit is Slave, normal operation
• Blinking Green: Diagnostics in progress
• Blinking Amber: Diagnostics in progress (Slave, unit number identified by the
number of blinks/pauses)
PS1 • Off: Power supply not present
• Solid Green: Normal operation
• Solid Amber: Power supply error detected
PS2 • Off: Power supply not present
• Solid Green: Normal operation
• Solid Amber: Power supply error detected
SFP/SFP+ Port LEDs
SFP and SFP+
Ports • Off: No link or link down
• Solid Green: Link up
• Blinking Green: Link up with activity
• Solid Amber: Link up (100M)
• Blinking Amber: Link up with activity (100M)