Alcatel-Lucent Enterprise OmniSwitch 6865, Hardware User'S Manual

Page: 31 / 63

OmniSwitch 6865 Hardware Users Guide 27
3. Plug the power supply-to-chassis connector cable (provided) into the DB-15 connectors located at
the rear of the power supply and the chassis.
4. For redundant power supply configurations, repeat these steps for the additional power supply at
the other side of the power supply tray.
Note. The switch does not provide an on/off switch. Instead, the switch powers
on when a power cord is plugged into the power supply’s front panel and
plugged into a power source.
Do not connect to a power source until all power supplies and power supply-to-
chassis cables are installed and the switch is ready to boot.
Power Supply-to-Chassis Cable (Provided)