Alcatel-Lucent Enterprise OmniSwitch 6865, Hardware User'S Manual

Page: 38 / 63

OmniSwitch 6865 Hardware Users Guide 34
Note. Be sure the boot process is complete before checking LED status. If LEDs
indicate persist errors, contact Alcatel-Lucent Customer Support.
Once the switch has completely booted, connect to the console port and log in to the switch’s Command
Line Interface (CLI) and configure basic information. For more information, refer to
“The First Login
Session” on page 34 .
The First Login Session
To complete the setup process, follow these steps during the first login session:
• Log in to the switch
• Unlock session types
• Change the login password
• Set the date and time
• Set optional system information
• Save changes
Important. Connect to the switch via the console port before initiating the first
login session.
Logging In to the Switch
At the login and password prompts, use the switch’s default settings:
Note. A user account includes a login name, password, and user privileges.
Privileges determine whether the user has read or write access to the switch
and which commands the user is authorized to execute. For detailed
information on setting up and modifying user accounts, refer to the OmniSwitch
Switch Management Guide.
The default welcome banner—which includes information such as the current software version and
system date—displays, followed by the CLI command prompt:
Welcome to the Alcatel-Lucent Enterprise OS6865 8.3.1, June 03, 2016.
Copyright (c) 1994-2014 Alcatel-Lucent. All Rights Reserved.
RJ45 (PoE) Ports • Off: No link or link down
• Solid Green: Link up (no PoE)
• Blinking Green: Link up (no PoE) with activity
• Solid Amber: Link up (PoE devices connected)
• Blinking Amber: Link up (PoE devices connected) with activity
Login: admin
Password: switch