8
The following output settings options are as follows:
Standard has two options:
-
DVB-T
is an abbreviation for Digital Video Broadcasting-Terrestrial. Select this option for
Television reticulation.
-
DVB-H
is an abbreviation for Digital Video Broadcast-Handheld. Select this option for
Mobile Handsets.
Once you have selected the “Standard” option press
transmit button on the programmer
to send the change through to module.
Program by has two options:
-
Frequency
meaning that the output of the modulator is done so by the frequency
entered e.g. 655.50.
-
Channel
meaning that the output of the modulator is done so by channel number.
You should always select to Program by “FREQUENCY” as this stops confusion of any changes
made to country channel plans.
Once you have selected the Frequency option press the
transmit button to send the changes
through to the modulator. The next two options
‘Channel table’
and
‘Channel’
will be locked and not
applicable if the setting ‘Program by Frequency’ has been selected on the last option as per ALCAD
recommendation.
Frequency is the selection box where you need to enter the output digital RF frequency you desire the
modulator to output the V/A feeds to. If you are unsure of the frequencies please note the Australian
digital Channel/ Frequency plan below.
