6
1.0 Programming of the Modulator
To program the Digital Modulator, place the programming switch in the ON (upward) position
which can be seen from picture below. When you turn the switch in the “ON” position the
programming indicator will light up. While the programming indicator remains lit, the modulator
is ready to receive data from the PS programmer. When the modulator has been programmed,
programming mode should be deactivated by placing the switch in the “OFF” position. The
programming indicator light will go out.
To start programming the DM-102 module you desire to programme please slide the
programming indicator switch to the ON position.
Press the On/Off button on the PS-011 programmer
to turn on programmer.
You should then see the window below which gives you the following options:
Ensure that “Select Series” is highlighted then press the
button which will take you to the
window on the next page. Using the arrow down
scroll down to
“DM A/V to DVB-T
modulator”
