14
2.6.3
Driving program selection switch [26]
When it is delivered to you, the scalamobil is individually
set to meet your requirements by an
representative.
Amongst other things, parameters such as the height of the
steps on the staircase that you use is permanently stored
as “Home staircase mode”.
If you travel up or down a staircase other than the one
stored in the device, then you can temporarily deactivate
the programmed setting by pressing the driving program
selection switch [26]. The scalamobil will then operate
using the factory setting or “Other staircase mode”.
If you then wish to revert to the preset staircase, place the
driving program selection switch [26] back to the “Home
staircase mode” setting.
For further details on these modes of operation, please
contact your
representative.
Switch pressed in: Home staircase mode activated
Switch not pressed in: Other staircase mode activated
