3.4
Mounting to the Wheelchair
In order to mount the scalamobil to your wheelchair, it has
to be equipped with a special
-holding device. If this
device has not been attached to your wheelchair yet, your
dealer, or the
-representative delivering the scalamobil
will do so.
· Remove the locking pins [19] from the upper bracket [20].
· Make sure that the wheels of your wheelchair are locked
with their brakes so that the wheelchair does not move.
· Set the rotation regulator [13] at the lowest climbing
speed (position 1).
· Align all four wheels of the scalamobil by pressing the
driving switch [2].
· Move the lower bolts [16] into the lower hooks of the
holding device [21]; make sure that the scalamobil is in
the middle of the wheelchair.
· Place the direction of travel switch [22] in the “Upwards“
position (see chapter 2.1) and press the driving switch
[2] so long until the upper mount [15] catches in the
mounting forks of the bracket [20].
19
19
20
21
19
20
