26
4.1
General instructions
When it is delivered to you, the scalamobil is individually
set by the
representative to meet your requirements,
particularly to the staircase on which you will be using it.
Please make sure that you allow your
representative
to explain all the possible scalamobil settings to you when
you are being instructed in the operation of the device.
If required, you may also change the driving speed (see
chapter 2.6.2) of the scalamobil, and activate and deactivate
the driving program (see chapter 2.6.3) and the single-step
switch (see chapter 4.4).
The direction of movement of the scalamobil can only be
changed when it is at a standstill, i.e. not whilst it is in
motion on the stairs, using the direction of movement
switch [22].
However, if the direction of movement is changed during
travel, then the change does not take effect until the driving
swich [2] has been released and pressed again.
There is a sensor integrated into the scalamobil which, only
during the ascent of a staircase, constantly compares the
inclination of the device to the preset ideal position. If the
deviation is too great (only in “home staircase mode”) the
scalamobil climbs to the next step and stops there. Further
travel is then only allowed if you reset the correct angle
of inclination (by going to the next step up, for example).
Depending on the programming undertaken by the
representative, further movement may then occur either by
keeping the driving switch [2] depressed or by releasing
and re-pressing the driving switch [2].
During the training on the scalamobil, carried
out by your specialist dealer or
representative, you will get more information
regarding the ideal angle of inclination for climbing
stairs.
4
Operation
