Albatron PX925X Series, User Manual

Page: 42 / 64

PX925X/PX925XE Series
38
ACPI Suspend Type
The item allows you to select the suspend type using the ACPI operating system.
Options:
S1 (POS) (default) Power on Suspend
S3 (STR) Suspend to RAM
S1 & S3 POS and STR
Run VGABIOS if S3 Resume
Select whether you want to run VGABIOS when the system wakes up from the S3 suspend
function. This field is not configurable if “ACPI Suspend Type” is set to “S1(POS)”.
Options: Auto (default)
、
Yes
、
No
Power Management
There are three options of Power Management:
1. Min. Saving
Minimum power management
Suspend Mode = 1hour
HDD Power Down = 15 minutes
2. Max. Saving
Maximum power management (only available for sl CPUs).
Suspend Mode = 1 minute
HDD Power Down = 1 minute
3. User Defined (default)
Allows you to set each mode individually.
When this option is enabled, each of the ranges are from 1 minute to 1 hour except for
HDD Power Down, which ranges from 1 minute to 15 minute and includes a “disable”
option.
Note: If you select Min. or Max. Power Saving modes, the “HDD Power Down” value and
the “Suspend Mode” value are both fixed.
Video Off Method
This option determines the manner in which the monitor goes blank.
Options:
V/H SYNC+Blank This selection will cause the system to turn off the vertical and
horizontal synchronization ports and write blanks to the video
buffer.
Blank Screen(default) This option only writes blanks to the video buffer.
DPMS Support Initial display power management signaling.
Video Off In Suspend
This determines whether power to the monitor is switched off when the computer is in
suspend mode. Options: Yes
、
No (default)