Albatron PX925X Series, User Manual

Page: 37 / 64

PX925X/PX925XE Series
33
Integrated Peripherals
Init Display First
With systems that have multiple video cards, this option determines whether the
primary display uses a PCI slot or an AGP slot. Options: PCIEx
、
PCI Slot (default)
OnChip IDE Device
IDE HDD Block Mode
Block mode is otherwise known as block transfer, multiple commands, or multiple sector
read/write. Select the “Enabled” option if your IDE hard drive supports block mode (most
new drives do). The system will automatically determine the optimal number of blocks
to read and write per sector. Options: Enabled (default)
、
Disabled
On-Chip channel0/channel1 PCI IDE
The mainboard chipset contains a PCI IDE interface with support for two IDE channels.
These two IDE channels are for IDE1 and SATA1/2/3/4 connectors use. Select “Enabled” to
activate the first and/or second IDE interface. Select “Disabled” to deactivate the
interface if you are going to install a primary and/or secondary add-in IDE interface.
Options: Enabled (default)
、
Disabled
IDE channel0/ channel1/Master/Slave PIO
The IDE PIO (Programmed Input / Output) fields let you set a PIO mode (0-4) for each of the
IDE devices that the onboard IDE interface supports. Modes 0 to 4 will increase
performance incrementally. In Auto mode, the system automatically determines the
best mode for each device. Options: Auto (default)
、
Mode0
、
Mode1
、
Mode2
、
Mode3
、
Mode4.
IDE channel0 /channel1 /Master / Slave UDMA
Ultra DMA 100 functionality can be implemented if it is supported by the IDE hard drives
in your system. As well, your operating environment requires a DMA driver (Windows 95
OSR2 or a third party IDE bus master driver). If your hard drive and your system software