Albatron PX925X Series, User Manual

Page: 17 / 64

PX925X/PX925XE Series
13
How to enable Dual-Channel DDRII:
These mainboards provide Dual-Channel functionality for its DIMM slots. Enabling
Dual-Channel can significantly increase your data access rates. DIMM1 and DIMM2 share
one channel, while DIMM3 and DIMM4 share the second channel. Enabling Dual-Channel
simply means to make sure that the total memory for the two channels are balanced. For
example: If you install one 256 MB module in DIMM1 and one in DIMM2 (256MB x 2 =
512MB), you must install a total of 512 MB between DIMM3 and DIMM4. In balancing the
memory on the two channels, you have, in effect, enabled Dual-Channel.
RAM Module Installation:
The following instructions explains memory module installation for these mainboards:
1. Pull the white plastic tabs at both ends of the slot away from the slot.
2. Match the notch on the RAM module with the corresponding pattern in the DIMM slot.
This will ensure that the module will be inserted with the proper orientation.
3. Lower the RAM module into the DIMM Slot and press firmly using both thumbs until the
module snaps into place.
4. Repeat steps 1, 2 & 3 for the remaining RAM modules.
＊
The pictures above are for reference only. Your actual
installation may vary slightly from the pictures.