Albatron PI965GME-M, User Manual

Page: 20 / 34

Mainboard PI965GME-M
16
JP3 Assignment Assignment
1
Pin 1-2 Closed
+5V USB Power On Disable (Default)
1
Pin 2-3 Closed
+5VSB
USB Power On Enabled
Note: “Closed” means putting a jumper cap onto two adjacent header pins.
Clear CMOS Jumper: JP2
The “Clear CMOS” function is used when you are unable boot your system and need to reset the BIOS
settings (CMOS settings) back to the manufacturer’s original settings. This is also a way to reset the
system password if you have forgotten it.
JP2 Assignment
Pin 1-2 Closed
Normal (Default)
Pin 2-3 Closed
Clear CMOS Data
Note: “Closed” means putting a jumper cap onto two adjacent header pins.
1. Turn off your system and disconnect the AC power cable.
2. Set JP2 header to OFF (2-3 Closed).
3. Wait several seconds.
4. Set JP2 header to ON (1-2 closed).
5. Connect the AC power cable and turn on your system.
6. Reset your new password.
The following steps explain how to reset your CMOS
configurations when you forgot a system password.