Albatron PI965GME-M, User Manual

Page: 13 / 34

Mainboard PI965GME-M
9
Memory Installation: DDRII 1/2
The PI965GME-M provides two DDRII SO-DIMM sockets with Dual Channel Technology supported.
This sockets allow you to install 200-pin, non-ECC & unbuffered DDR II 667/ 533/ 400 SO-DIMM,
supporting to install a total memory capacity of 4 GB.
Memory Installation Steps:
1. Pull the white plastic tabs at both ends of the slot away from the slot.
2. Match the notch on the RAM module with the corresponding pattern in the DIMM slot. This will
ensure that the module will be inserted with the proper orientation.
3. Lower the RAM module into the DIMM Slot and press firmly using both thumbs until the module
snaps into place.
4. Repeat steps 1, 2 & 3 for the remaining RAM modules.
＊
The pictures above are for reference only. Your actual installation may
vary slightly from the pictures.