Albatron PI965GME-M, User Manual

Page: 19 / 34

Mainboard PI965GME-M
15
Pin Assignment Pin Assignment
1 RSTB- 2 RAFD-
3 RPDR0 4 ERR-
5 RPDR1 6 RIVIT-P-
7 RPDR2 8 KSLIN-
9 RPDR3 10 GND
11 RPDR4 12 GND
13 RPDR5 14 GND
15 RPDR6 16 GND
17 RPDR7 18 GND
19 ACK- 20 GND
21 BUSY 22 GND
23 PE 24 GND
PRT PORT
25 SLCT 26 GND
Power for LVDS Connector Header: JP4, JP5
When you connect one LVDS flat panel or other compatible devices, you must adjust the jumper caps
on the JP4 and JP5 headers to enable this functionality. Please refer to the table below.
JP4 Assignment
Pin 1-2 Closed
LVDS Power +5V
Pin 2-3 Closed
LVDS Power +3.3V(Default)
JP5 Assignment
Pin 1-2 Closed
LVDS Power +12V (Default)
Pin 2-3 Closed
LVDS Power +5V
Note: “Closed” means putting a jumper cap onto two adjacent header pins.
USB Power On function Header: JP3
USB devices attached to the back panel USB ports can awaken the system from sleep mode. In order
to enable this functionality, you must adjust the jumper cap on JP3 header for +5V or +5VSB mode
depending on which USB port that the USB device is attached to.