Albatron KM266 Series Manual Download Page 51

Page: 51 / 63

RTC Wake Up

When “Enabled”, you can set the date and time at which the

RTC (real-time clock) alarm awakens the system from Suspend

mode.

The Choices: Enabled, Disabled (default).

Date (of Month)

You can choose which month the system will boot up. This field

is only configurable when “RTC Resume” is set to “Enabled”.

Resume Time (hh: mm: ss)

You can choose the hour, minute and second the system will

boot up. This field is only configurable when “RTC Resume” is
set to “Enabled”.

IRQs Activity Monitoring

Press Enter to access another sub menu used to configure the

different wake up events (i.e. wake on LPT & COMM activity).

Primary INTR

IRQ3 (COM2)

Enabled

IRQ4 (COM1)

Enabled

IRQ5 (LPT2)

Enabled

IRQ6 (Floppy Disk)

Enabled

IRQ7 (LPT1)

Enabled

IRQ8 (RTC Alarm)

Disabled

IRQ9 (IRQ2 Redir)

Disabled

IRQ10 (Reserved)

Disabled

IRQ11 (Reserved)

Disabled

IRQ12 (PS/2 Mouse)

Enabled

IRQ13 (Coprocessor)

Enabled

IRQ14 (Hard Disk)

Enabled

IRQ15 (Reserved)

Disabled

Summary of Contents for KM266 Series
































































Search results

Summary of Contents for KM266 Series

Reviews:

Related manuals for KM266 Series

Brands by name

Popular brands

Albatron KM266 Series, Manual

Search results

Summary of Contents for KM266 Series

Reviews:

Related manuals for KM266 Series

Brands by name

Popular brands