37
IRQ Resources
When resources are controlled manually, assign each system
interrupt a type, depending on the type of device using the
interrupt. This is only configurable when “Resources Controlled
By” is set to “Manual”.
IRQ-3
assigned to: PCI device
IRQ-4
assigned to: PCI device
IRQ-5
assigned to: PCI device
IRQ-7
assigned to: PCI device
IRQ-9
assigned to: PCI device
IRQ-10
assigned to: PCI device
IRQ-11
assigned to: PCI device
IRQ-12
assigned to: PCI device
IRQ-14
assigned to: PCI device
IRQ-15
assigned to: PCI device
PCI / VGA Palette Snoop
Some graphic controllers that are not VGA compatible take the
output from a VGA controller and map it to their display as a
way to provide boot information and VGA compatibility.
The Choices: Disabled (default), Enabled.
PCI Latency Timer (CLK)
This item allows you to set up the PCI Latency Time (0-255) and
when you select 32 PCI Clock it can make your PCI Speed
fastest.
The Choices: 0-255, 32 (default)
PCI1/2/3 IRQ Assignment
This item allows you to assignment the PCI Slot’s IRQ.
The Choices: Auto (default), 3, 4, 5, 7, 9, 10, 11, 12, 14, 15.
Frequency/Voltage Control
CPU Speed Detected
This item shows the CPU speed information; which detected by
the system.
Spread Spectrum
This item allows you to enable/disable the Spread Spectrum
function.
The Choices: Enabled (default), Disabled.
