40
IDE HDD Block Mode
Block mode is otherwise known as block transfer, multiple
commands, or multiple sector read/write. Select the “Enabled”
option if your IDE hard drive supports block mode (most new
drives do). The system will automatically determine the optimal
number of blocks to read and write per sector.
The Choices: Enabled (default), Disabled.
VIA OnChip PCI Device
If you highlight the literal “Press Enter” next to the “VIA OnChip
PCI Device” label and then press the enter key, it will take you a
submenu with the following options:
AC97 Audio
This option allows you to control the onboard AC97 audio.
The Choices: Auto (default), Disabled.
Onboard Audio Codec
This option allows you to control the onboard audio codec.
The Choices: Enabled (default), Disabled.
AC97 Modem
This option allows you to control the onboard AC97 modem.
The Choices: Auto (default), Disabled.
USB Controller
This option should be enabled if your system has a USB installed
on the system board. You will need to disable this feature if you
add a higher performance controller.
The Choices: Enabled (default), Disabled.
USB Device Support
Enables support for USB attached keyboards.
The Choices: Disabled (default), Enabled.
