Mainboard K8NF4X–754
45
Appendix III: Bridge Card Setup
Introduction
Through two dual graphics cards installed on the mainboard and its software programs
configuration, users can review and process their tasks on four separated monitors at once,
further have improved their working performance and efficiency. In addition, via the Bridge
Card setup, the improved PCI-Express bandwidth can let users utilizing the PCI-E efforts in
more efficient ways.
Setup Steps
1. Insert two dual graphics cards onto the mainboard PCI-E x16 slots. Detailed explanation
of hardware installation, please refer your graphics card’s User Manual.
2. Insert two end slots of the Bridge Card onto the golden fingers of two dual graphics cards
top edge, the Bridge Card then will be settled done. At mean while, we recommend you to
attach the monitor cable to the D-Sub or DVI connector of your first inserted graphics card
for monitor display.
.
Attention
1.
Window XP is the recommended operating system.
2.
It is recommended that use two identical dual graphics cards, i.e.,
same brand and same specification.
3.
Detailed explanation of software installation, please refer your
graphics card’s User Manual. (We recommend you to stall the
71.84g of driver version by downloading from websites.)
4.
The exact power requirement will depend on needs of your
overall system configuration and two dual graphics cards. (We
recommend you to set power supply at
≧
400W) and +12V current
at
≧
25A. )
