Mainboard K8NF4X–754
28
EPP Mode Select
Select EPP port type 1.7 or 1.9. This field is only configurable if “Parallel Port Mode” is set to
“EPP” or “ECP+EPP”. Options: EPP 1.9(default), EPP 1.7.
ECP Mode Use DMA
Select a DMA Channel for the parallel port when using the ECP mode. This field is only
configurable if “Parallel Port Mode” is set to “ECP”. Options: 3 (default), 1.
PWRON After PWR-Fail
This field will determine whether your system will boot after restoring power after a power
failure. If you select “On”, the system will boot whether or not the system was on before
power failure. If you select “Former-Sts”, the system will be restored to the status before the
power failure.
Options: Off (default), On, Former-Sts.
Power Management
The Power Management Setup Menu allows you to configure your system to utilize energy
conservation features as well as power-up/ power-down options.
ACPI Suspend Type
The item allows you to select the suspend type using the ACPI operating system.
Options: S1 (POS) (default) Power on Suspend
S3 (STR) Suspend to RAM
S1 & S3 POS and STR
