5
Instructions for Viewing Fault History
1. Press and hold the
Reset/Menu
button for 3-5 seconds.
2. The display will read
LIMIT SETUP
. Press the
UP ARROW
button until the
Display reads
VIEW FAULT HIS
TORY. Press the
ENTER
button
3. The display will show the following:
A. Top Line
1.
Fault #/# of total faults (left hand corner of display screen).
The
maximum number of faults saved is 64. after 64 faults, the oldest fault
Will be deleted. The newest fault will be 1 /# of faults.
2.
Cycle cont (RH corner of display screen).
This will display the cycle
count when the fault occurred.
B.
Bottom
Line
Fault description
. This is the fault or error code.
4. Use
the
UP ARROW
and
DOWN ARROW
buttons to scroll through the
fault history.
5. Once done, push the
RESET
button once to get back to the main menu.
Push the
RESET
button
again to get the door ready to run. The display will read
DOOR READY
and the cycle count.
Summary of Contents for R-BAC UltraSmart
Page 1: ...UltraSmart ...
Page 18: ...18 ...
